Outline of Pellets
A pellet (plastic pellet) means the materteral molded into the shape of granularity in the size of 3 to 5 mm so as to allow for easy crushing, cleansing, melting, and processing. Our company manufactures and sells these pellets.
These pellets are widely used as molding material for planter containers, pallets for carrying loads, vehicular step devices, detention tanks, and other various plastics products.
Features
- 2 production sites: Keihin and Fukuyama (Total production capacity: 4.8 t/h)
- Sales of hot cut pellets and strand pellets
- Stable pellet quality, also available for use as board molding material
Equipment
Item | Content |
---|---|
Extruder | Twin screw, single screw |
Shaft diameter | 150φ、105φ |
Capacity | 2 t/h x 2 units 0.5 t/h x 1 unit |
Mesh size | #20 to #40 |
Item | Content |
---|---|
Extruder | Single screw x 2 stages |
Shaft diameter | 140φ、140φ |
Capacity | 0.3 t/h x 3 units |
Mesh size | #60 |
Products
Item | Content |
---|---|
Main component | Polyolefin group |
MFR | 3 to 4 |
Geometry | Cylindrical (approx. 3Φ x 3 mm) |
Bulk density | >0.5 |
Water content | <0.5% |
Chloride concentration | <0.3% |
Ratio of foreign substances | Max. 0.5% |
Item | Content |
---|---|
Main component | Polyolefin group |
MFR | 3 to 4 |
Geometry | Elliptical cylinder (approx. 3Φ x 3 mm) |
Bulk density | >0.55 |
Water content | <0.5% |
Chloride concentration | <0.3% |
Ratio of foreign substances | <0.2% |